Home → DC100/200 ILT Radiometer Retrofit → Remove Machine Components to Access Radiometer → Remove Side Skins

2.3. Remove Side Skins

  1. Using a 1/8” Allen key, remove the four bolts securing the UV Bank Shield (this runs from the ceiling to the floor inside the rear door – see blue square and green highlight below) and set this piece aside.

  2. Using a 5/32” and a 1/8” Allen key, remove the 2 black strips on the side of the machine and set aside.

  3. Using a 5/32” Allen key, remove the bolts securing the upper side skin to the frame (indicated below) and remove the skin (You may want to have a second person assist with the skin removal)

  4. Set the skin aside

This page was: Helpful | Not Helpful
← Remove Side Window and Brackets Remove Radiometer Stage Skins →