Home → DC100/200 ILT Radiometer Retrofit → Remove Machine Components to Access Radiometer → Remove Side Window and Brackets

2.2. Remove Side Window and Brackets

  1. Remove the upper radiometer window bracket by using a 1/8” Allen key to remove the 5 bolts shown below (make sure to reach into the machine to hold the bracket when removing the last bolt)

  2. Remove the lower radiometer window bracket by using a 1/8” Allen key to remove the 5 bolts indicated below (make sure to reach into the machine to hold the bracket when removing the last bolt)

  3. LOOSEN the remaining 12 window bracket bolts using a 1/8” Allen key (do not remove them) – This will free up the window panels inside to allow for removal

  4. Remove the four window panels from the machine and set aside (1 clear UV pane, 3 tinted panes)

This page was: Helpful | Not Helpful
← Remove Roof Skins Remove Side Skins →