Home → DC100/200 ILT Radiometer Retrofit → Reinstall Skins on Machine → Reinstall Side Skins and Window

7.2. Reinstall Side Skins and Window

  1. ***Leave all hardware loose until instructed otherwise

  2. Reinstall the upper side skin (You may want another person to assist with this)

  3. Reinstall the UV glass (tinted panes towards the outside)

  4. Reinstall the window brackets

  5. Reinstall the black side strips

  6. Once all fasteners have been started in the black side strips,  the hardware for the side skin can be tightened (leave the #10 bolts in the black strips loose)

  7. Install the UV partition onto the window brackets.

  8. Once the UV partition is installed, all window bracket hardware can be tightened

This page was: Helpful | Not Helpful
← Reinstall Radiometer Skins