Home → DC100/200 ILT Radiometer Retrofit → Install USB Hub in Enclosure and Connect Cables → Connect USB Cables
5.2. Connect USB Cables
-
Unplug CBL30008 and CBL30010 from the PC USB ports and move to the USB hub (USB cables from the radiometer must be landed in the PC, not the hub)
-
Plug the new USB cables (CBL30013 & CBL30014) into the PC
-
Make sure all cable bundles on top of the machine have been re-secured to the frame, confirm that there are no loose cables hanging down beneath the frame member, as this may cause problems when the carousel is rotating
This page was: Helpful |
Not Helpful