Home → DC100/200 ILT Radiometer Retrofit → Remove Existing Radiometer and Cabling → Electrical Enclosure

3.3. Electrical Enclosure

  1. Remove raceway covers inside electrical enclosure (if applicable) - PIC HERE

  2. If power cable is installed, remove power cables from terminal block  - WIRE NUMBERS

  3. Remove power cable from machine

  4. Unplug serial cable from PC

  5. Follow serial cable through enclosure to the loose end, cutting any cable ties along the way

  6. Remove serial cable from machine

This page was: Helpful | Not Helpful
← Front Panel, HMI, and Top of Machine